Belkin F5D7632uk4v3000 - Manual (Page 70)

71 70
Setting Up your Computers
71 70
Manually Configuring Network Adapters
in Windows 98SE or Me
1.
Right-click on “My Network Neighborhood” and select “Properties” from
the drop-down menu.
2.
Select “TCP/IP -> settings” for your installed network adapter. You will
see the following window.
3.
If “Specify an IP address” is selected, your Router will need to be set up
for a static IP connection type. Write the address information in the table
below. You will need to enter this information into the Router.
(1)
(2)
(3)