Belkin F5D7632uk4v3000 - Manual (Page 86)

87 86
Troubleshooting
87 86
4.
Click “Apply Changes” to finish. You must now
set all clients to match these settings.
Problem:
I am having difficulty setting up Wi-Fi Protected
Access (WPA) security on a Belkin Wireless Router
or Belkin Access Point for a business.
Solution:
If your network uses a radius server to distribute keys to the clients,
use this setting. This is typically used in a business environment.
1.
From the “Security Mode” drop-down
menu, select “WPA (with server)”.
2. For “Encryption Technique”, select “TKIP” or “AES”. This
setting will have to be identical on the clients that you set up.
3.
Enter the IP address of the radius server
into the “Radius Server” fields.
4. Enter the radius key into the “Radius Key” field.
5.
Enter the key interval. Key interval is how often
the keys are distributed (in packets).
6. Click “Apply Changes” to finish. You must now
set all clients to match these settings.
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA)
security on a Belkin Wireless Card for a home network.
Solution:
Clients must use the same key that the wireless router
or access point uses. For instance if the key is “Smith
Family Network Key” in the wireless router or access
point, the clients must also use that same key.
1.
Double-click the “Signal Indicator” icon to bring up the
“Wireless Network” screen. The “Advanced” button will allow
you to view and configure more options of your Card.
2.
The “Advanced” button will allow you to view
and configure more options of the Card.