Sharp R-722STWE - Manual (Page 236)

GB-17
MANUAL OPERATION
Use the STOP/CLEAR button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press the STOP/CLEAR button twice.
4. To set and to cancel the child lock (refer to page GB-
19 ).
MICROWAVE COOKING
Your oven can be programmed for up to 95 minutes (95:00).
The input unit of cooking (defrosting) time varies
from 5 seconds to 95 minutes. It depends on the total
length of the cooking (defrosting) time as shown on
the table. Cooking Time
0-1 minute
1-5 minutes
5-10 minutes
10-30 minutes
30-95 minutes Increasing Unit
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
MANUAL COOKING/ MANUAL DEFROSTING
• Enter the cooking time and use the microwave power levels P100 to P10 to cook or defrost (refer to
page GB- 16 ).
• Stir or turn the food, where possible, 2 - 3 times during cooking.
• After cooking, cover the food and leave to stand, where recommended.
• After defrosting, cover the food in foil and leave to stand until thoroughly defrosted.
Example:
To cook for 2 minutes and 30 seconds on P80 (80%) microwave power.
1. Press the
MICRO.
POWER
button.
P100 will be
displayed.
2. Rotate the
ENTRY dial
to select the
power level
for P80.
3. Press the
START/
+30sec./
ENTER
button to
confi rm the
setting.
4. Enter the
cooking time
by rotating
the ENTRY
dial.
5. Press the START/
+30sec./ENTER
button to start
cooking. (The
display will count
down through
the programmed
cooking time.)
NOTE:
• When the oven starts, the oven lamp will illuminate and the turntable will rotate clockwise or anti-
clockwise.
• If the door is opened during cooking/defrosting to stir or turn over food, the cooking time on the
display will stop automatically. The cooking/ defrosting time starts to count down again when the
door is closed and the START/ +30sec./ENTER button is pressed.
• When cooking/defrosting is complete, the time of day will reappear on the display, if the clock has
been set.
• If you wish to know the power level during cooking, press the MICRO. POWER button. The current
power level will displayed for 3 seconds.