Sharp MX-7040N - Manual (Page 10)

10
COPY
Colour mode
Automatically identifies colour or black & white
to copy
Copies in full colour
Copies in black & white
Copies in 2 colours
Copies in a single colour
Paper Select
Tray 1/Tray 2/Tray 3/Tray 4
Bypass Tray (Optional)*
Specify the type and size of paper.
Large Capacity Tray (Optional)
Output
Outputs to the middle tray of the machine
Outputs to the offset tray of the finisher
Outputs by sorting on a set basis
Outputs by sorting on a page basis
Outputs to the output tray on the right of the
machine
Copy Ratio
Displays the basic ratio menu.
Displays the XY Zoom ratio menu.
Automatically sets the ratio based on the
original settings and paper settings.
Sets the ratio based on the original
settings and paper settings.
Enlarges or reduces the image
in increments of 1%
Transits to the "Other Ratio" screen
Transits to the "by Paper" screen
Transits to the "by Size" screen
2-sided copy
1-sided copy
Outputs two 1-Side original sheets to one
2-Side sheet
Outputs one 2-Side original sheet to one
2-Side sheet
Outputs one 2-Side original sheet to two
1-Side sheets
Copy settings
Basic operations
1
Place the
original
2
Copy settings
3
Preview
4
Specify the
number of
copies
5
Start
(Black & white, or colour)
1 Copy settings
2 Displays the [Function Review] dialog
3 Scans the original and displays it in the preview area (if preview is required)
4 Cancels all settings
Corrects the number
of copies
* Please note that the Bypass-tray is standard feature in some countries and regions.