Sharp R-622STM - Manual (Page 5)

ENGLISH
GB-4
OVEN AND ACCESSORIES
ACCESSORIES:
Check to make sure the following accessories are provided:
(15) Turntable (16) Turntable support (17) Coupling (18) Rack
• Place the coupling into the turntable motor shaft. Then place the
turntable on to the turntable motor shaft; ensuring it is located
firmly.
• To avoid turntable damage, ensure dishes and containers are
lifted clear of the turntable rim when removing them from the
oven.
• For use of the rack, refer to the grilling sections on page GB-13.
Never touch the grill when it is hot.
NOTE: When you order accessories, please mention two items: part
name and model name to your dealer or SHARP authorised service
agent.
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not damaged.
• Always operate the oven with the turntable and turntable support fitted correctly. This promotes thorough, even cooking. A badly fitted
turntable may rattle, may not rotate properly and could cause damage to the oven.
• Place all food and containers of food on the turntable for cooking.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you start the oven. This does not affect
cooking performance.
Hub (inside)
15. Turntable
(glass)
17. Coupling 16. Turntable
support
OVEN
1. Door handle
2. Oven
lamp
3. Door hinges
4. Door safety latches
5. Door
6.
Door seals and sealing surfaces
7. Turntable motor shaft
8. Oven cavity
9. Control panel
10. Grill heating element
11. Waveguide cover (DO NOT REMOVE)
12. Power supply cord
13. Ventilation
openings
14. Outer cabinet
1
4
6 2 10
9
9
4 8 7 3 5
13
12
14
18. Rack