Detaching and attaching the oven door, Risk of injury, Detaching the door – Neff B14P42N3GB User Manual

Page 23: Open the oven door fully, Attaching the door, Removing the door cover, Remove the cover (figure b), Replace the cover and secure it in position, Close the oven door, Removing and installing the door panels

Advertising
background image

23

6.

Insert the hook-in rack at the front as far as it will go and push

downwards (figure D).

Detaching and attaching the oven door

For cleaning purposes and to remove the door panels, you can

detach the oven door.
The oven door hinges each have a locking lever. When the

locking levers are closed (figure A), the oven door is secured in

place. It cannot be detached. When the locking levers are open

in order to detach the oven door (Fig. B), the hinges are locked.

They cannot snap shut.

:

Risk of injury!

Whenever the hinges are not locked, they snap shut with great
force. Ensure that the locking levers are always fully closed or,
when detaching the oven door, fully open.

Detaching the door

1.

Open the oven door fully.

2.

Fold up the two locking levers on the left and right (figure A).

3.

Close the oven door as far as the limit stop. With both hands,

grip the door on the left and right-hand sides. Close the door

a little further and pull it out (figure B).

Attaching the door
Reattach the oven door in the reverse sequence to removal.

1.

When attaching the oven door, ensure that both hinges are

inserted straight into the opening (figure A).

2.

The notch on the hinge must engage on both sides (figure B).

3.

Fold back both locking levers (figure C). Close the oven

door.

:

Risk of injury!

If the oven door falls out accidentally or a hinge snaps shut, do
not reach into the hinge. Call the after­sales service.

Removing the door cover

The oven door cover can become discoloured. To carry out

thorough cleaning, you can remove the cover.

1.

Open the oven door fully.

2.

Unscrew the oven door cover. To do this, undo the left and

right screws (figure A).

3.

Remove the cover (figure B).

Make sure that the oven door is not closed while the cover is

removed. The inner panel may be damaged.
Clean the cover with a stainless-steel cleaning agent.

4.

Replace the cover and secure it in position.

5.

Close the oven door.

Removing and installing the door panels

To facilitate cleaning, you can remove the glass panels from the

oven door.
When removing the inner panels, pay attention to the sequence

in which the panels are removed. In order to reassemble the

panels in the correct sequence, use the numbers that appear

on each panel.

D

D

&

'

%

$

%

$

%

$

&

%

$

Advertising