Neff B14P42N3GB - Manual (Page 9)

9
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
Switching on the appliance
1. Turn the operating mode selector until the desired operating
mode is selected.
A default temperature appears in the temperature display.
2. Turn the temperature selector to change the default
temperature.
Note: If no default temperature is displayed, the temperature for
your selected operating mode is a fixed setting. You cannot
change this temperature.
Current temperature
Press the
± info button. The current temperature appears for
3 seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the Û position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
1. Press and hold the ± info button for 3 seconds to go to
the basic settings menu.
In the temperature display,
™‚‹ appears.
2. Press the ± info button briefly and repeatedly until the setting
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g. ™„ƒ ).
3. Using the temperature selector, set the required basic setting
within a submenu (e.g. ™„„ ).
4. Press and hold the ± info button for 3 seconds.
Your basic setting is saved.
You can change the following basic settings:
Automatic safety cut-out
The automatic safety cut-out is activated if your appliance is
switched on and you have not made any settings for a long
time.
The length of time after which your appliance switches itself off
depends on the settings that you make.
‹‹‹ flashes in the temperature display. Appliance operation is
interrupted.
Turn the operating mode selector to the
Û position to
deactivate it.
Operating mode Default temper-
ature in °C
Temperature
range in °C
3 CircoTherm® 160 40 - 200
% Top/bottom heat 170 50 - 275
4 Circo-roasting 170 50 - 250
+ Radiant grilling* 220 50 - 275
$ Bottom heat 200 50 - 225
A Defrost Fixed setting
x Pyrolytic cleaning 0 1, 2 and 3
^ Interior lighting Fixed setting
* Turn the temperature selector beyond 275 °C. ‚Ÿ£ appears
in the temperature display
$ %
Temperature dis-
play
Meaning
• Residual heat high (above 120 °C)
œ Residual heat low (between
60 °C and 120 °C)
Basic settings menu
Submenu
Basic setting Setting
symbol
Childproof lock Appliance controls
unlocked
™‚‹
Appliance controls locked ™‚‚
Appliance controls perma-
nent lock
™ƒ‚
Audible signal Audible signal off ™„‹
Audible signal 30 seconds ™„‚
Audible signal 2 minutes ™„ƒ
Audible signal 10 minutes ™„„