Steam, Steam cooking, Notes – Neff B46C74N3GB User Manual

Page 27: Aquaassist - steam-assisted cooking, Note, Switching on aquaassist, Switch on the appliance, Fill the water tank, Slide in the water tank all the way, Select the operating mode

Advertising
background image

27

Steam

You can cook food using steam in various ways:

Steaming with the Mega System steamer

Cooking with AquaAssist

Cooking with the automatic programmes

Steam cooking

The

é

Steam cooking operating mode can only be used in

conjunction with the Mega System steamer (available as a

special accessory from specialist retailers).
Only switch Steam cooking on when the cooking compartment

has cooled down completely (room temperature).
If "Not possible" appears on the text display when you switch

on the Steam cooking operating mode and

and

¨©¨

appear

alternately in the temperature display, the cooking compartment

has not cooled down completely.
Wait until the cooking compartment has cooled down and

switch Steam cooking on again. The Steam cooking process is

controlled automatically.

Notes

Only use the Steam cooking operating mode for steaming.

Only use the Mega System steamer for steaming.

Do not use Steam cooking together with the preselection

mode clock function.

You will find further useful information in the instruction

manual included with the Mega System steamer.

AquaAssist - steam-assisted cooking

When you cook with AquaAssist, steam is introduced into the

cooking compartment at various intervals and with varying

degrees of intensity. This gives you a better cooking result.

Your food:

becomes crispy on the outside

develops a shiny surface

is succulent and tender on the inside

only undergoes a minimum reduction in volume

You set the combination of operating mode and steam intensity

that you want. You can set the steam intensity to low, medium

or high for the following operating modes:

CircoTherm

3

%

Top/bottom heat

0

Circotherm intensive

ë

Bread-baking

Circo-roasting

4

Note: Use the information in the table to select a suitable

operating mode and steam intensity.

Switching on AquaAssist

1.

Switch on the appliance.

2.

Fill the water tank.

3.

Slide in the water tank all the way.

4.

Select the operating mode.

5.

Set the temperature or the Dough proving setting

6.

Press the

Ÿ

AquaAssist button repeatedly until the required

steam intensity appears in the text display.

7.

Start appliance operation.

Switching off AquaAssist

Press the

Ÿ

AquaAssist button repeatedly until the steam

intensity (low, medium, high) goes out in the text display.

Appliance operation continues without steam.

AquaAssist table
Example: Joint of pork with crackling

1.

Set Step 1.

Operating mode:

3

CircoTherm

Temperature: 100 °C

Steam intensity: high

Cooking time: 25 - 35 minutes

2.

After 25 - 35 minutes, set Step 2.

Change the temperature to 170 °C

Cooking time: 60 - 75 minutes

3.

After 60 - 75 minutes, set Step 3.

Change the operating mode to

4

Circo-roasting

Change the temperature to 200 °C

Switch off the Steam intensity

Cooking time: 20 - 30 minutes

4.

After 20 - 30 minutes, switch off the appliance.

Food

Steps

Shelf

height

Operat-

ing mode

Temperature

in °C/Dough

proving

Steam

intensity

Cooking

time in min-

utes

Notes

Baked items
Small cakes

-

1

3

150 ­ 160

medium

25 - 30

German brioche

-

1

3

150 ­ 160

medium

35 ­ 45

Choux pastry (cream puffs/

éclairs)

-

1

3

200 ­ 220*

low

25 ­ 35

Puff pastry slices

-

1

3

200 ­ 220*

low

15 ­ 25

Vol au vents, not filled

-

1

3

200 ­ 220*

high

8 - 10

* Preheat the appliance

Advertising