Neff B46C74N3GB - Manual (Page 29)

29
Ovenware
Use the suggested ovenware. All meals have been tested using
this ovenware. The cooking result may change if you use
different ovenware.
Amount/ weight
The automatic programmes require the weight of the food. With
individual pieces, always enter the weight of the largest. The
total weight must be within the specified weight range.
Starting and ending a programme
Select a suitable programme from the programme table. Every
programme is operated with steam. A programme can only be
started when the cooking compartment has cooled down
completely (room temperature).
Example
You would like to prepare three fresh chicken legs (150 g,
180 g and 200 g):
■
Programme group “Poultry“
■
Programme “Chicken portions, fresh“
1. Turn the operating mode selector to the off position Û .
2. Fill the water tank.
3. Slide in the water tank all the way.
4. Press the X Programme button.
The first programme group is shown on the text display.
5. Turn the operating mode selector until the desired
programme group appears on the text display (e.g. Poultry).
6. Press the i Navigation button.
The first programme in the programme group is shown on
the text display.
7. Turn the operating mode selector until the desired
programme appears (e.g. Chicken portions, fresh).
The temperature display shows a suggested weight (e.g.
0.1 kg).
Note: If a suggested weight still does not appear, then press
the i Navigation button. There are other options you can
select using the operating mode selector.
If you want to return to the programme groups, press the
i
Navigation button repeatedly until the last selected
programme group appears.
8. Turn the temperature selector to set the weight for the
heaviest piece (200 g in the example).
Note: Press the ± Info button to call up information on
accessories.
9. Press the i Navigation button.
The scale AÙÙÙØÙÙÙ@ appears in the text display.
If required, adjust browning to taste for the food being
cooked.
Turn the operating mode selector to change the setting on
the scale:
■
anti-clockwise = less browning, how well the food is cooked
■
clockwise = more browning, how well the food is cooked
Note: In the basic settings menu, you can adjust the degree
of browning for all automatic programmes (see section:
Changing the basic settings).
10. Press the ƒ Start button.
No heating indicator appears. A signal sounds at the end of
the programme. The programme is finished.
11. Switch off the appliance.
Notes
■
If you wish to call up the duration of the programme, press
the KJ Clock function button until the KJ and x symbols
light up.
■
If you wish to interrupt (pause) the programme, briefly press
the „ Stop button. Press the ƒ Start button to continue the
programme.
■
If you wish to cancel the programme, press and hold the „
Stop button.
Programme table
In this section you will find all the programme groups and the
programmes they contain. Read the instructions before
preparing food using a programme.
Notes
■
With individual pieces, always enter the weight of the largest
piece.
■
Follow the instructions about turning and cutting. They are
shown in the text display.
3
%UHDG
3
&KLFNHQSRUWLRQVIUHVK
3RXOWU\
Programme group Programme Selection Weight range in
kg
Accessories Shelf
height
Bread
White bread In tins 0.40 - 1.00 Wire rack 1
Flatbread - 0.40 - 1.00 Baking tray 1
Cakes & pastries
Plaited loaf, unfilled / savarin - 0.50 - 1.50 Baking tray 1
Fatless sponge cake - 0.30 - 0.70 Wire rack 1
Victoria sponge cake - 0.30 - 0.50 Wire rack 1
* note on cutting into the bread will be shown. Confirm the information using the ƒ Start button.
** note on cutting into the bread will be shown. Confirm the information using the ƒ Start button.