Barco E-2320 C (SE) - Manual (Page 49)

Installing drivers and software
49
Installing drivers and software
This chapter will guide you through the installation of the drivers,
software and documentation associated with your B
ARCO
N
IO
Display
System or B
ARCO
E-2320 C Display(s).
Driver and software installation prerequisites
Note: To install or remove the drivers, software, or
documentation you must be logged on as a user with
administrator privileges.
Your operating system must be installed and running before you can
install the driver, software and documentation for the display
controller(s) for your B
ARCO
Display System.
Before you begin make sure that all of your B ARCO E-2320 C Display(s)
are connected to the appropriate display controller(s) in your system.
Installing drivers and software in Windows
This chapter is divided into two sections. The first section describes
the process for installing the drivers and software for the B
ARCO
MXRT
family of controllers. The second section describes the process for
installing the drivers and software for the B
ARCO
M
ED
C
ORONIS
family of
controllers.
Installing the B
ARCO
MXRT drivers and software
Note: The installation dialog will display in English if your
operating system’s language is not supported.
This process applies to the following versions of Windows:
• Windows 2000 Professional,
• Windows XP Professional,
• Windows Professional x64 Edition,
• Windows Server 2003, and