Barco E-2320 C (SE) - Manual (Page 73)

Display operation
73
To enable user controls:
1. Do not use the control wheel for at least 3 seconds.
2. Rotate the control wheel 1 step clockwise.
3. Press the control wheel 2 times.
4. Rotate the control wheel 1 step counterclockwise. The on-
screen display appears.
Note: Steps 2 to 4 must be performed in maximum 3
seconds.
5. Rotate the control wheel to select Settings.
6. Press the control wheel to enter the Settings menu.
7. Rotate the control wheel to select User Controls.
8. Press the control wheel to switch from “Off” to “On”.
9. Exit the menus and save the changes.
SETTINGS
DPMS On
Power LED On
User Controls Off
Automatic Menu Exit On
EXIT