Barco E-2320 C (SE) - Manual (Page 84)

Cleaning
84
Attention: The dust remover contains a liquid gas. If you shake
the can or move the can too fast while spraying, you may blow
drops of liquid on the panel surface!
If this is the case, clean the panel as described below.
• If the LCD panel is dirty or wet, clean the panel using a lint-
free, nonabrasive cloth, lightly moistened with a solution of
25% Isopropyl Alcohol (IPA) and 75% de-ionized or distilled
water. E.g.: Cleareen, a product of Certified Laboratories.
In case you do not dispose of these products, use plain water
instead.
• Take another clean, dry, soft, lint-free cloth and gently wipe
the glass dry.