Barco E-2320 C (SE) - Manual (Page 54)

Installing drivers and software
54
or
a) browse to the root directory of the location where you
saved the contents of your B
ARCO
N
IO
Display System
Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of the
line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
D:\Setup.exe -silent
See figure 20 for an example of how the command line window
should look when using the silent install from the B
ARCO
N
IO
Display System Installation CD-ROM.
Figure 20: