Bernina ACTIVA 135 S - Manual (Page 10)

Setting up the sewing computer 9
• attach the box to the sewing computer
(catch A must engage); inserting
the presser foot lifter into the opening H
Note: first lower the presser foot lifter!
Removing the accessory box
• press catch A on the top of the box
• remove box to the rear
Free standing accessory box
• pull both feet out until they click into
place
• stand box in chosen position
Storing accessories
Standard accessories are supplied in a
plastic bag.
The box is equipped with one small and
one large drawer (B and C) as well as com-
partments for bobbin holders D and presser
feet E. (Additional compartments and
drawers are available as optional extras.)
• push the bobbins into the compartments
provided
• to remove a bobbin, press the compart-
ment holder F lightly
• insert the presser feet into the slot E
• the needle selection box can be stored in
compartment G
Attaching the accessory box to the
sewing computer
• close the doors
• push feet back into position
Accessory box
Available as a special accessory
A
C
F
B
D
E
H
G
he CFL
nation
FL
placed
he
ught
ler!
135_145_S_engl 14.3.2003 15:33 Uhr Seite 9
030529.52.04_0303_a135 a145_EN