Bernina ACTIVA 135 S - Manual (Page 42)

41 Selected practical stitches: Buttonholes
Automatic standard buttonhole with auto length
Both beads are sewn in the same direction.
Note:
The automatic buttonhole foot No. 3A must lie perfectly flat on
the fabric. If the foot lies on a seam, the length cannot be measu-
red accurately.
Standard buttonhole No. 10
size and type suitable for fabric selected (see p. 57)
cotton or polyester
up (sewing position)
Automatic buttonhole foot No. 3A
Automatic standard buttonhole
• insert the lower thread in the finger of the bobbin case (p. 39)
• when using Buttonhole foot No. 3A, the length of the button-
hole is automatically registered by the lens on the foot = exact
duplication and automatic sequence change when the maximum
length has been sewn
•
each step of the sewing sequence blinks on the screen
Note:
When any automatic buttonhole is selected,
presser foot No. 3 is indicated on the screen.
3A
Stitch:
Needle:
Thread:
Feed-dog:
Presser foot:
135_145_S_engl 14.3.2003 15:33 Uhr Seite 41
030529.52.04_0303_a135 a145_EN