Bernina ACTIVA 135 S - Manual (Page 43)

Selected practical stitches: Buttonholes 42
5 4 3 2
1
Programme the standard buttonhole
1 sew the first bead forwards, stop the sewing computer
• press the reverse button
• «auto» and presser foot No. 3A are indicated on the screen =
the buttonhole length is programmed
2 the sewing computer sews reverse straight stitch automatically
3 the first bar tack
4 the second bead forwards
5 the second bar tack and securing stitches
• sewing computer stops and returns automatically to buttonhole
begin
Auto buttonhole
•
all subsequent buttonholes will be sewn to exactly the same
length (no need to press the reverse button)
•
press the «clr/del»-button to delete the programme
• the programmed buttonhole can be saved in the long term
memory (see p. 49)
Corrections see p. 40
Balance
•
any changes to the balance affect both beads of auto length
buttonholes, because both beads are sewn in the same direction
Exact duplicates
the auto function ensures that
each buttonhole will be exactly
the same length as the pre-
vious one
Marking
mark only the beginning of the
buttonholes – a real time
saver!
Sewing speed
•
sew at moderate speed for
best results
•
sew all buttonholes at the
same speed for a consistent
bead density
TIP
Note:
When all buttonholes have
been sewn, return balance to
the normal setting!
Compensating plates for
buttonholes (special accessory)
If a buttonhole is to be sewn
horizontally to the edge of the
garment, it is worth using the
compensating plates.
This accessory provides an even
surface for the buttonhole foot
with slide which results in a per-
fect buttonhole (see tips p. 40).
135_145_S_engl 14.3.2003 15:33 Uhr Seite 42
030529.52.04_0303_a135 a145_EN