Bernina ACTIVA 135 S - Manual (Page 16)

15 Setting up the sewing computer
Changing the presser foot
Presser foot with shank
•
raise the needle and
•
presser foot
•
turn power switch to «0»
Attaching the presser foot
•
guide the foot upwards
•
over the cone
•
press the clamping lever
down
•
raise the clamping lever
•
remove the presser foot
Refer to the safety
instruction!
Collapsible vertical spool pin
•
found on the back of the sewing computer
behind the handwheel
• essential aid for sewing with more than one thread, i.e. double
needle work
• raise the pin until it clicks into its vertical position
• when using large reels, add the foam pad A for stability
Supplementary spool pin
A
135_145_S_engl 14.3.2003 15:33 Uhr Seite 15
030529.52.04_0303_a135 a145_EN