Philips AVENT Vigilabebés DECT - Manual (Page 12)

Baby unit
Loudspeaker volume: 3
Nightlight: off
Lullaby: 1
menu options
Most functions can be operated on both the baby unit and the parent unit, but there are some
functions that can only be set via the menu options available on the parent unit.
menu operation - general explanation
1 Press the MENU button to open the menu (Fig. 1).
The first menu option appears on the display.
 Use the – and + buttons to select the desired menu option (Fig. ).
 Press the OK button to confirm your choice (Fig. 33).
 Use the + and - buttons to select the desired setting.
5 Press the OK button to confirm your choice.
J appears on the display.
6 Press the MENU button again to exit the menu (Fig. 1).
Note: Always press the MENU button, the – and + buttons and the OK button briefly. If you press the
buttons too long, they do not work.
nightlight on/off
1 Select K or L by pressing the – and + buttons. Confirm the
selected setting by pressing the OK button.
playing lullabies
To play or stop a lullaby:
1 Select |K by pressing the – and + buttons and confirm by pressing the OK
button.
 Select : to play the last played lullaby again or <| to stop playing.
Confirm by pressing the OK button.
To select a different lullaby:
1 Select |K by pressing the – and + buttons and confirm by pressing the OK
button.
 Select ~ by pressing the – and + buttons and confirm by pressing the OK
button.
 Select the desired lullaby by pressing the – and + buttons and confirm by pressing the OK
button.
adjusting microphone sensitivity
You can set the microphone sensitivity of the baby unit to the desired level. You can only change the
microphone sensitivity when a connection between the baby unit and the parent unit has been
established, i.e. when the LINK light on the parent unit lights up green continuously.
1 Select ZR by pressing the – and + buttons and confirm by pressing the OK
button.
-
-
-
,
,
EngliSh 1