Philips AVENT Vigilabebés DECT - Manual (Page 12)

1 Press the MENU button to open the menu (Fig. 28).
, The first menu option appears on the display.
2 Use the – and + buttons to select the desired menu option (Fig. 29).
Note: The arrow indicates in which direction you can navigate.
3 Press the OK button to confirm (Fig. 30).
4 Use the + and - buttons to select the desired setting.
5 Press the OK button to confirm.
, The new setting flashes twice and then disappears from the display.
6 Press the MENU button again to exit the menu.
nightlight on/off
1 Select ‘Light’ with the + and - buttons.
2 Press the OK button to confirm.
3 If the nightlight is off, the display shows ‘On?’. Press the OK button to switch on the
nightlight. If the nightlight is on, the display shows ‘Off?’. Press the OK button to switch off
the nightlight.
lullaby function
Selecting a lullaby
1 Select ‘Lullaby’ with the + and - buttons.
2 Press the OK button to confirm.
3 Press the + button once or several times to select one of the five lullabies from the list or to
select ‘Play All’.
4 Press the OK button to confirm.
When you have selected one of the five lullabies, it plays continuously.
Switching to another lullaby
1 Press the + button to choose another lullaby from the list.
2 Press the OK button to confirm.
pausing a lullaby
1 Press the OK button.
, The message ‘Paused’ appears on the display.
2 Press the OK button again to continue the lullaby.
If you do not continue the lullaby within 20 seconds, the lullaby function switches off automatically.
The message ‘Paused’ and the lullaby symbol disappear from the display.
Stopping a lullaby
1 Press the + button to select ‘Stop’ from the list.
2 Press the OK button to confirm.
adjusting microphone sensitivity
Note: You can only adjust the microphone sensitivity in the menu of the parent unit.
EngliSh 12