Belkin F1DD102L - Manual (Page 34)

32
Troubleshooting
Problem:
I am connecting my computer to the SOHO KVM Switch via USB and my
keyboard and mouse do not work.
Solution:
• Prior to connecting the SOHO KVM Switch, make sure that the HID
USB driver is installed on each computer. (To install the HID USB driver,
connect a USB mouse and USB keyboard to the computer. Windows should
automatically install the drivers.)
Problem:
Some of the keys on my keyboard are not functioning properly when I use a
Mac computer.
Solution:
• Because you are using a PC keyboard on a Mac computer, a few of the
option keys on your PC keyboard may be reversed. All major keys will
function as labeled.
AUDIO AND MICROPHONE
Problem:
I have connected the speakers to the KVM Switch and I am not getting any
sound from my computer.
Solution:
• Check that the sound is enabled on the computer by going into the system setting.
• Check that the volume is turned up in your sound configuration.
• Make sure that the audio cable is connected properly and connected to the
appropriate connector.
• Check that the speakers you are using are functioning properly.