Belkin F1DD102L - Manual (Page 9)

7
1
2
3
4
5
6
7
8
section
Installing the KVM Switch
Connecting the KVM Switch
The KVM Switch is a plug-and-play device for installation. For a quick start
on installation and operation, please follow the instructions below for the
setup sequence:
Step 1.
Connect the shared keyboard,
monitor, and mouse (also speaker
set and microphone) to the console
port of the KVM Switch.
Step 2.
Connect each of your
computers to the KVM
Switch, using the USB KVM
cable, and audio and
mic cables.
Step 3.
Power your KVM Switch by
connecting the external power
adapter to it.
Note: Since the USB interface is hot-pluggable, you don’t have to turn off the
computer before making connections to the KVM Switch.
1 2 3 4