Philips EnergyUp Lampe Energylight - Manual (Page 16)

Travel lock
You can activate the travel lock to prevent the appliance from being
switched on when a button is pressed accidentally while you travel or
carry the appliance.
1 To activate the travel lock, press and hold the on/off button for
5 seconds (Fig. 12).
, If the appliance is on, it switches off. The segments of the timer
indicator bar flash once to confirm that the appliance is locked.
, When the appliance is locked, the segments of the timer indicator
bar will flash once when you press the on/off button briefly to
indicate that the appliance is locked. If you touch the + or - button
while the appliance is locked, the appliance does not respond.
2 To deactivate the travel lock, press and hold the on/off button for
5 seconds.
, The appliance switches on.
, The segments of the time indicator bar flash twice to confirm that
the appliance is unlocked.
, The + and - buttons are active again.
Note: The travel lock is deactivated automatically when you connect the
appliance to the mains.
Cleaning and storage
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
1 Clean the appliance with a dry cloth (Fig. 13).
2 If you are not going to use the appliance for some time or if you
want to take it with you while travelling, put it in the travel pouch
for protection (Fig. 14).
ENGLISH 16