Brother DCP-8025D - Manual (Page 230)

TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 2
Cooling Down
Wait for a
while
The temperature of the drum unit or toner
cartridge is too hot. The DCP will pause its
current print job and go in
to cooling down mode. During the cooling
down mode, you will hear the cooling fan
running while the display on the DCP shows
Cooling Down
, and Wait for a while.
You must wait 20 minutes for it to
cool.
Cover Open
Pls Close
Cover The front cover was not completely closed. Close the front cover for the drum
unit.
DX Lever
Error The paper adjustment lever for duplex
printing is not correctly set for the paper size. Set the duplex lever to the correct
position. (See To use Automatic
Duplexing for copy and print
operations (For DCP-8025D) on
page 2-11.)
Face Up Open The face-up output tray is open. Please close the face-up output tray.
Fuser Open The fuser cover is open. Please close the jam clear cover.
(See Paper jams on page 14-5.)
Machine Error
XX
DCP has a mechanical problem. Call Brother or your dealer for
service.
No DX Tray You tried to make duplex printing with duplex
cover open. Install the duplex tray correctly. (See
Paper is jammed in the duplex tray
(For DCP-8025D) on page 14-9.)
Out of Memory You can’t store data in the memory. (Copy operation in process)
Press Stop/Exit and wait until the
other operations in process finish
and then try again.
—OR—
Add an optional memory. (See
Memory board on page 15-1.)
(Printing operation in process)
Reduce print resolution. (See Print
Quality on page 7-5.)
—OR—
Clear the data in the memory. (See
Out of Memory message on page
5-5.)
—OR—
Add an optional memory. (See
Memory board on page 15-1.)
ERROR MESSAGES
ERROR
MESSAGE CAUSE ACTION