Brother DCP-8025D - Manual (Page 81)

6 - 6 USING THE DCP AS A PRINTER
4
Using both hands put paper in the manual feed tray until the
front edge of the paper touches the paper feed roller and the
DCP grips the paper.
5
After the printed page comes out of the DCP, put in the next
sheet of paper as in Step 4 above. Repeat for each page that
you want to print.
The MP tray (For DCP-8025D)
1
Select the Paper Size, Media Type, Paper Source, and other
settings in the printer driver.
Media Type: Plain Paper
Paper Source: MP Tray
2
Open the MP tray and lower it gently.
3
Pull out the MP tray support flap.
■
Make sure that the paper is straight and in the proper
position on the manual feed tray. If it is not, the paper may
not be fed properly, resulting in a skewed printout or a paper
jam.
■
Do not put more than one piece of paper in the manual feed
tray at any one time, or it may cause a jam.