Brother DCP-8025D - Manual (Page 35)

2 - 10 PAPER
3
When loading paper in the MP tray, make sure it touches the
back of the tray.
4
While pressing the paper-guide release lever, slide the paper
guide to fit the paper size.
■
Make sure that the paper is straight and in the proper
position on the MP tray. If it is not, the paper may not be fed
properly, resulting in a skewed printout or a paper jam.
■
You can place up to 3 envelopes or up to 50 sheets of 80
g/m
2
paper in the MP tray.
When you put paper in the MP tray, please remember the
following:
■
The side to be printed on must be face up.
■
During printing, the inside tray rises to feed paper into the
DCP.
■
Put the leading edge (top of the paper) in first and push it
gently into the tray.