Brother DCP-8025D - Manual (Page 86)

USING THE DCP AS A PRINTER 6 - 11
6
While pressing the paper-guide release lever, slide the paper
guide to fit the paper size.
7
Send the print data to the DCP.
8
When you have finished the print job, close the back output tray.
Caution
Remove each sheet immediately after printing. Stacking the sheets
may cause a paper jam or the paper to curl.
When you put paper in the MP tray, please remember the
following;
■
During printing, the inside tray rises to feed paper into the
DCP.
■
The side to be printed on must be face up.
■
Put the leading edge (top of the paper) in first and push it
gently into the tray.