Brother DCP-8025D - Manual (Page 84)

USING THE DCP AS A PRINTER 6 - 9
4
Using both hands put the paper in the manual feed tray until the
front edge of the paper touches the paper feed roller and the
DCP grips the paper.
5
Send the print data to the DCP.
6
After the printed page comes out of the DCP, put in the next
sheet of paper as in Step 4 above. Repeat for each page that
you want to print.
7
When you have finished the print job, close the back output tray.
Caution
Remove each sheet immediately after printing. Stacking the sheets
may cause a paper jam or the paper to curl.
■
Make sure that the paper is straight and in the proper
position in the manual feed tray. If it is not, the paper may not
be fed properly, resulting in a skewed printout or a paper
jam.
■
Do not put more than one piece of paper in the manual feed
tray at any one time, or it may cause a jam.