Chapter, Configuring the brocade icx 6650, In this chapter – Brocade Communications Systems Brocade ICX 6650 53-1002599-01 User Manual
Page 35: Brocade icx 6650 slot and ethernet port numbering, Chapter 3, Chapter 3, “configuring the brocade icx 6650

Brocade ICX 6650 Hardware Installation Guide
19
53-1002599-01
Chapter
3
Configuring the Brocade ICX 6650
In this chapter
•
Brocade ICX 6650 slot and Ethernet port numbering . . . . . . . . . . . . . . . . . 19
•
Assigning permanent passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
•
•
•
•
Troubleshooting network connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Brocade ICX 6650 slot and Ethernet port numbering
Many CLI commands require users to enter port numbers as part of the command syntax, and
many show command outputs display port numbers. The port numbers are entered and displayed
in stack-unit/slot number/port number format. In all Brocade ICX 6650 inputs and outputs, the
stack-unit number is always 1.
The ICX 6650 contains the following slots and Ethernet ports:
•
Slot 1 is located on the front of the ICX 6650 device and contains ports 1 through 56. Ports 1
through 32 are 10 GbE. Ports 33 through 56 are 1/10 GbE SFP+ ports. Refer to the following
figure.
Slot 1