Brocade Communications Systems Brocade ICX 6650 53-1002599-01 - Manual (Page 52)

36 Brocade ICX 6650 Hardware Installation Guide
53-1002599-01
Managing temperature settings
5
Displaying the temperature
To display the temperature of a device, enter the show chassis command at any level of the CLI.
NOTE
This temperature reflects the temperature of the board inside the device.
ICX6650-64 Router#sh chas
The stack unit 1 chassis info:
Power supply 1 (NA - AC - Regular) present, status ok
Power supply 1 Fan Air Flow Direction: Back to Front
Power supply 2 (NA - AC - Regular) present, status ok
Power supply 2 Fan Air Flow Direction: Back to Front
Fan 1 ok, speed (auto): [[1]]<->2
Fan 2 ok, speed (auto): [[1]]<->2
Fan controlled temperature: 47.5 deg-C
Fan speed switching temperature thresholds:
Speed 1: NM<----->68 deg-C
Speed 2: 63<-----> 85 deg-C (shutdown)
Fan 1 Air Flow Direction: Back to Front
Fan 2 Air Flow Direction: Back to Front
MAC-Back Temperature Readings:
Current temperature : 41.5 deg-C
MAC-Left Temperature Readings:
Current temperature : 42.0 deg-C
MAC-Right Temperature Readings:
Current temperature : 42.5 deg-C
MAC-Front Temperature Readings:
Current temperature : 44.5 deg-C
CPU Temperature Readings:
Current temperature : 41.0 deg-C
Center Temperature Readings:
Current temperature : 26.0 deg-C
sensor A Temperature Readings:
Current temperature : 34.5 deg-C
sensor B Temperature Readings:
Current temperature : 35.5 deg-C
sensor C Temperature Readings:
Current temperature : 47.5 deg-C
sensor D Temperature Readings:
Current temperature : 39.5 deg-C
Warning level.......: 68.0 deg-C
Shutdown level......: 85.0 deg-C
Boot Prom MAC : 00.00.00
Management MAC: 00-00-00
Syntax: show chassis