BlueAnt Supertooth 2 Bluetooth portable handsfree - Manual (Page 11)

Note: If pairing has failed, repeat the procedure. If pairing succeeded, then your
SuperTooth II kit is now ready to use. You can now make or answer a
call using your kit instead of your phone.
Important Remarks:
•
On some versions of Nokia, Motorola, Sony Ericsson and Sharp phone software, the kit
will not connect automatically to the cell phone until you do One press on the Pick-
Up/Hang-Up Button of the Supertooth II to connect to the cell phone.
•
If disconnection problem are encountered on some Nokia cell phones, kindly turn off the
keypad tones of your cell phone.
MULTI-PAIRING
You can pair 2 devices to the Supertooth II (Multi-Pairing). That is, the
Supertooth II can remember connection information for two different
devices and will connect with either when requested depending on
which is in range and which was connected last.
When Pairing a second mobile phone, make sure the first is off or out of
range.
You will overwrite the first paired device by pairing a third device to the
Supertooth II. The pairing rule is… first in first out.
If you cannot connect to a previously paired and connected phone, go to
the Bluetooth menu in the phone and select the Supertooth II and Press
Connect.. Some phones may require this if it is the second phone used.
You do not have to repair the devices just manually connect..
11