BlueAnt Supertooth 2 Bluetooth portable handsfree - Manual (Page 48)

d. MAKING A CALL with the Handsfree Kit on
Normal dialing
With your XDAII you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1. Press button to bring up the dialer screen.
2.
Tap the number on the keypad, and then tap Talk key.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing,
audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the
case you have to press once on the Send Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up
Button.
e. AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the XDAII can be done by accessing the phone’s
Bluetooth Headset icon.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button.
f.
REJECTING A CALL
Rejecting a call must be done by selecting IGNORE on the phone or by pressing the Reject
Button on the Supertooth II
g. SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
Useful Information for XDA11
After pairing the Supertooth please make sure headphones are enabled on your XDAII.
Tap Start....Settings... Today....Items and tick Profile. (Make sure profile is ticked).
This allows you to enable or disable the Supertooth. You will see a small headphones symbol on
the main screen allowing you to connect or disconnect from the Supertooth quickly...
Note: The XDAII can only use one audio device set as the default. To use a second paired device
as the default, a workaround is to rename the device.
48