Bowflex RevolutionXP - Manual (Page 10)

10
Assembly (Unboxing)
Warning: The Bowflex Revolution ® XP Home Gym is very heavy. Whenever possible use
two people to unbox the main unit.
We have designed the packaging to make unboxing the main unit as safe and easy as
possible.
Step 1
1-1
Open the top flaps of Box 2
(Figure A) and split the
corners along the perforations
to expose the top layer of
styrofoam. (Figure B)
Open top flaps
Split box corners
along perforations
Top layer of
styrofoam
Figure A Figure B
Figure C
Figure D
Rear Stabilizer
Top layer of
styrofoam
Lower portion of
Main Frame
W A R N I N G
10
Rear Stabilizer Hardware
Figure E
Foot Caps
Step 2
2-1 Remove the Rear Stabilizer,
and Hardware Pack, (Figure C)
then remove the top layer of
styrofoam to expose the lower
portion of the Main Frame.
(Figure D)
The two Foot Caps that are
packaged in this box will be installed
in Step 6. (Figure E)
NOTE: Some of the hardware needed for unboxing is located on the Box 3 Hardware Card