Assembly, Step 21 install pulleys – Bowflex RevolutionXP User Manual

Page 24

Advertising
background image

24

Assembly

Step 21 Install Pulleys

Parts:

• Pulley Components (Box 3)

Tools:

• Screwdriver

NOTE: Remove and discard the hex nut to

disassemble the Pulley components.

21-1 Place a Spring Cap over a threaded hole in a
Stabilizer and screw the Hook Bolt into the
hole ONLY about three turns. (Figure A)

21-2 Place the Spring down over the Hook Bolt.
Compress the Spring and hook the Eyelet
under the Pulley to the Hook Bolt. (Figure B)

21-3 Place a screwdriver through the Spring and
Hook Bolt on the Pulleys and tightly screw
them into the Stabilizers. (Figure C)

NOTE: Place the pulleys with the

pre-installed cable closest to the main frame.

Screwdriver

Pulley

Spring

Hook Bolt

Spring Cap

Hook Bolt

Spring Cap

Pulley

Spring

Eyelet

Hook Bolt

Figure A

Figure B

Figure C

Hex Nut (discard)

Advertising