Bowflex RevolutionXP User Manual

Page 2

Advertising
background image

2

Before You Start ....................................... 2

Tools You Will Need / Hardware Contents .... 3

Box Contents ............................................ 6

Assembling Your Bowflex Revolution ..........10

Important Contact Numbers ......................29

Table of Contents

Before You Assemble

Select where you are going to locate your Bowflex Revolution®XP carefully. The best place for your
Bowflex Revolution®XP

is on a hard, level surface. For best results, assemble your the unit in the

location where you intend to use it. Allow a workout area of at least 7’ length x 7’ width (2.1m L x 2.1m
W) of free space for safe operation of the Bowflex Revolution®XP.

Basic Assembly Principles

Here are a few basic tips that will make your assembly of the Bowflex Revolution®XP quick and easy.
By using these principles, you can simplify each process and save yourself extra time and effort.

1. To make the assembly process go faster, gather the pieces you need for each step and thoroughly

read the assembly instructions for that step prior to starting assembly for the step.

2. When tightening a locknut on a bolt, use a combination wrench to grip the locknut and ensure that

it is fastened securely.

3. When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt

through the holes.


4. As a general rule, and for all bolts and nuts on your Bowflex Revolution®XP, turn bolts or nuts

toward the right to tighten and left to loosen. Or you can remember the mnemonic: “Righty tighty,
lefty loosey.”

Before You Start

Advertising