Bowflex RevolutionXP - Manual (Page 23)

23
Assembly
Step 20 Install Cable Hooks
Parts:
• Rope Hooks (Box 3 Hardware Card)
Tools:
• 5/16” Allen Wrench
20-1 Align the Hooks with the holes in the
Main Frame with the tabs on the hooks
inserted into the slots in the Main Frame.
20-2 Install and completely tighten the hardware.
Hardware (1:1):
Hook
1/2” Nylock nut
Main Frame
Hook
1 Button Head Cap Screw (1/2” X 4 ”) 1 Nylock Nut (1/2”)
1/2”x 4” Button Head
Cap Screw
NOTE: The remaining holes in the
Main Frame just above the
Hook Holes should be plugged
with two 1/2” plugs from the
Box 2 hardware card.
The remaining plugs are
not needed on this unit and
can be discarded.
Plug these holes
Plug