Bowflex RevolutionXP - Manual (Page 11)

11
Step 3 Assemble Rear Stabilizer
Parts:
• Rear Stabilizer (Box 2)
• Rubber Pads (Box 3 hardware card)
• Transport Wheels (Box 3)
Tools:
• 7/32” Allen Wrench
3-1 Insert Transport Wheels into Rear Stabilizer
making sure that the holes in the Stabilizer
and the plates on the Transport Wheels are
pointing up.
3-2 Install and completely tighten the hardware.
3-3 Press the Rubber Pads into the holes on the opposite
side of the hardware.
Rear Stabilizer
Hardware (1:1):
2 Button Head Cap Screw With Threadlock (3/8” X 3/4 ”) 2 Washer (3/8”)
Assembly (Unboxing)
Rubber Pad
Transport Wheel
Transport Wheel
Plate
Holes
Transport Wheel
Plate