Bowflex RevolutionXP - Manual (Page 22)

22
Step 18 Install Seat Tube
Parts:
• Seat Tube (Box 4)
Tools:
• 7/32” Allen Wrench
18-1 Align the Seat Tube with the holes in the
Seat Support Plates and the Lower Seat
Connector.
18-2 Install and completely tighten the hardware
from step 17 and 18.
Assembly
Hardware (1:1):
4 Button Head Cap Screw (3/8” X 4”) 8 Narrow Washer (3/8”) 4 Nylock Nut (3/8”)
Seat Support Tube
3/8”x 4” Button Head Cap
Screw
3/8” Narrow Washer
3/8” Nylock Nut
Step 19 Seat Tube Cap
If you ordered the Lat Attachment,
do not install the Seat Tube Cap.
Refer to the Lat Attachment Assembly Manual
Parts:
• Seat Tube Cap (Box 4)
Tools:
• 7/32” Allen Wrench
19-1 Insert the Seat Tube Cap into the top of the
Seat Tube.
19-2 Install and completely tighten the hardware.
Hardware (1:1):
6 Button Head Cap Screw With Threadlock (3/8” X 3/4”) 6 Narrow Washer (3/8”)
Seat Tube Cap
3/8”x 3/4” Button Head
Cap Screw
3/8” Narrow Washer
Seat Tube