Philips 50PF9431D-37B - Manual (Page 13)

Notes:
- Once you completed the initial installation procedure you
can access the screens from the Settings menu. See p. 23.
- If the TV has already been installed before and/or you want
to change the First time installation settings, proceed with
How to navigate through the menus, p. 12.
First time installation
1. After an introduction screen, you are asked to select a
language of the TV’s on-screen-menus. (The text of the
header and the info on screen continuously change
language.)
2. Press the cursor up/down to highlight your language.
3. Press the
OK button.
4. Follow the on-screen instructions to proceed.
Turn the TV on
< Press the power switch B at the right side of the TV.
>
An indicator on the front of the TV lights up.
< Press the +CH/PAGE- button or the POWER B button
on the remote control.
Note: the first time (and only the first time) you turn on your
TV, you see a Welcome screen followed by the installation
procedure. See First time installation below.
11
English
User Man
ual