Source devices, English, User man ual – Philips 50PF9431D-37B User Manual
Page 45: Connector you have connected to, Devices with rgb output, Jacks of, 2. connect the audio cables to the, Connect an s-video cable to the, Jacks and to the, Connector do not connect any device to the
Note:This TV is capable of displaying 1080i, 720p and 480p DTV signals when connected to a DTV
tuner cable box. Select the output of the cable box to either 1080i, 720p or 480p. A DTV signal must
be available in your area.
Connect a DVD Player or other accessory digital source devices
43
English
User Man
ual
L
Pr
H
R
Pb
V
Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
AV1
VIDEO
L
R
VIDEO
AV1
AV3
DVD / Cable box
2
1
DIGITAL
AUDIO
IN
3
AV1/AV3 :
YPbPr
AV1 :
L + R
Devices with Component Video Output
Connectors (YPbPr)
1. Connect the three separate component video
cables 1 to the device having component
video outputs (YPbPr), such as cable boxes,
DVD-players, laser-disc players, videogame
players, satellite receivers or other equipment,
and to the Y, Pb and Pr jacks of
AV1
or
AV3
on the TV.
2. Connect to the Y, Pb and Pr jacks of
AV1
in
case of devices with analog audio signals.
3. Connect to the Y, Pb and Pr jacks of
AV3
in
case of devices with digital audio signals.
4. Select the equipment you have connected in
the Setup menu, Select your source, p. 22
and link it to the
AV
connector you have
connected to.
L
Pr
H
R
Pb
V
DIGITAL
AUDIO
IN
Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
VIDEO
L
R
VIDEO
DVD / Cable box
AV1 :
H + V
AV1 :
L + R
2
3
AV1 :
YPbPr
1
AV1
Devices with RGB Output
L
Pr
H
R
Pb
V
DIGITAL
AUDIO
IN
Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
AV1
VIDEO
L
R
VIDEO
AV1
AV2
DVD / Cable box
AV1/AV2 :
S-VIDEO
1
2
AV1/AV2 :
L + R
Devices with an S-Video connector
1. Connect the device with RGB output with
separate Horizontal and Vertical sync to the
Pr/R, Pb/B and Y/G input 1 jacks and to
the
H
and
V
jacks of
AV1
2.
2. Connect the audio cables to the
L
and
R
AUDIO
jacks of
AV1
3.
3. Select the equipment you have connected in
the Setup menu, Select your source,
p. 22 and link it to
AV1
.
1. Connect an S-Video cable to the
AV1
or
AV2
S-VIDEO
input 1.
2. Connect the audio cables to the device’s
AUDIO L
and
R
jacks and to the
L
and
R
AUDIO AV1
or
AV2
jacks 2 on the TV
accordingly to where you connected the S-
Video cable.
3. Select the equipment you have connected in
the Setup menu, Select your source, p. 22
and and link it to the
AV
connector you have
connected to.
Tip:When using the
S-VIDEO
connector do
not connect any device to the
AV
VIDEO
input that you are using.