Philips 50PF9431D-37B - Manual (Page 25)

Auto clock channel (only available when Auto clock mode is set
to Automatic)
With the cursor buttons, select the channel number where
time can be found by the TV. Typically time can be found on
PBS (Public Broadcasting System) as well as some other
channels.
Time - Day (only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time
and day.
If Auto clock mode Manual has been selected, and no
clock search has been done, the system will keep the
entered time and day.
Time zone (only available when Auto clock mode is set to
Automatic)
This function allows you to select your local time zone.
Broadcasted time information will correct the clock display
for your local time.
1. Select Time zone with the cursor down.
2. Press the cursor right to select your local time zone.
Daylight saving (only available when Auto clock mode is set to
Automatic)
Daylight saving time is automatically set by specially
broadcasted signals.This menu item allows you to disable
the automatic setting of daylight saving time.This is useful if
you live in an area or state where daylight saving is not
applied, but you receive channels from other areas where
daylight saving signals are broadcasted.
1. Select Daylight saving with the cursor down.
2. Press the cursor right to select Automatic for automatic
clock correction for daylight saving time, based on specially
broadcasted signals.
3. Select Off to disable automatic clock correction based on
the specially broadcasted signals.
Use of the Setup menu (continued)
23
English
User Man
ual
Use of the TV menu settings
Info
Settings
TV
Setup
Installation
Demo
Exit
TV
Picture
Sound
Features
Channels
This menu allows you to adjust your preferred picture and
sound settings and to control the settings of special TV features
and functions.
1. Press the MENU button on the remote control.
> The Settings menu appears on the screen.
2. Select TV and press the cursor right.
> The TV menu is displayed and gives an overview of the
menu items you can select.
Note: Dependent on the input signal, one or more menu
items may not be selectable.
Note: Changes in Clock settings are only activated after
switching to standby.