A vcr or dvd recorder, Connect a vcr or dvd recorder, Of your recorder to the tv’s – Philips 50PF9431D-37B User Manual
Page 40: Input jacks of, Input and connect the audio cables to the, When using the, Connector do not connect any device to the
L
Pr
H
R
Pb
V
DIGITAL
AUDIO
IN
Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
AV1
VIDEO
L
R
VIDEO
ANTENNA
75
o
CABLE
RECORDER
OUT
IN
3
AV2 :
L + R + VIDEO
Connect a VCR or DVD recorder
38
1. Connect the RF Antenna or Cable TV cable (eventually via an optional two-way signal splitter
and/or Cable TV converter box) 1 to the
RF IN
socket of your recorder.
2. Connect another RF cable 2 from the output
OUT
of your recorder to the TV’s
CABLE/ANTENNA 75 Ω
x jack.
3. Better playback quality can be obtained if you also connect the Video, Audio Left and Right (only for
stereo devices) AV cables 3 to the
VIDEO
,
AUDIO L
and
R
input jacks of
AV2
.
4. Select the equipment you have connected in the Setup menu, Select your source, p. 22 and link
them to the
AV
connectors you have connected your equipment to.
Warning: do not place your recorder too close to the screen as some recorders may be susceptible
for signals from the display. Keep a minimum distance of 0,5 m from the screen.
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the
S-VIDEO
input and connect the
audio cables to the
AUDIO L
and
R
input jacks of
AV2.
When using the
S-VIDEO
connector do not connect any device to the
AV2 VIDEO
jack.
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.