Philips 50PF9431D-37B - Manual (Page 19)

Use of the Setup menu
17
English
User Man
ual
1. Press the MENU button.
2. Select Setup with the cursor down and press the cursor
right to select the Preferences menu.
3. Press the cursor right again to select Picture/sound
preferences.
4. Press the cursor right once more to enter the
Picture/sound preferences menu.
Adjust picture/sound preferences
PIP format
This menu allows you to select the preferred format (PIP or
Dual screen) which can then be displayed toggling the
PIP
button on the remote control On or Off.
1. Select PIP format.
2. Press the cursor right.
3. Select
PIP or Dual screen with the cursor up/down.
Now, when the PIP button on the remote control is
pressed and when
-
PIP is selected, the TV shows a full screen of video with a
pip window of video on top of it.
- Dual screen is selected, the TV splits the screen into two
equally sized screens.
4. Press the cursor left/right to highlight the PIP window or
the left/right screen in Dual screen.
5. Press the -CH/PAGE+ button to change the broadcast
channel or the AV+ button to change the HDMI source in
the highlighted screen.
This menu is used to control the settings of special TV
functions, features and accessory devices.
The Preferences menu allows you to change settings that will
typically be accessed only occasionally.
The Source menu allows you to select a source.
The Clock menu allows you to use your TV as a clock.This
setup is necessary for the correct working of the Lock after
feature.
Info
Settings
TV
Setup
Installation
Demo
Exit
Setup
Preferences
Source
Clock
Set your preferences
Info
Setup
Settings
Preferences
Picture/sound pref.
Features prefer.
Menu preferences
Reset AV settings
Preferences
Source
Clock
Note: PIP format:
PC formats via HDMI will always be displayed full screen.
Note: Audio only plays from the main, when PIP has been
selected, or the left screen, when Dual screen has been
selected.
Remind: Dual screen/PIP functionality, also called HDMI PIP,
is a function used to watch a broadcast and a HDMI source
simultaneously.
• A broadcast can be analog or digital, cable or antenna.
• An external HDMI device (DVD, DVD-R, Set Top Box,A/V
receiver,...) must be connected to
HDMI 1 or HDMI 2 .