With a/v outputs, English, User man ual – Philips 50PF9431D-37B User Manual
Page 43: Of the satellite receiver or cable box to the tv’s, Audio input jacks of, Input of, And connect the audio cables to the, Input jacks of, When using the, Connector do not connect any device to the
L
Pr
H
R
Pb
V
DIGITAL
AUDIO
IN
Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
AV1
VIDEO
L
R
VIDEO
AV1
ANTENNA
75
o
Cable box
IN
CABLE
OUT
2
AV1 :
L + R + VIDEO
Connect a satellite receiver or Cable box with A/V outputs
41
English
User Man
ual
1. Connect the satellite antenna cable or the Cable TV cable 1 to the satellite receiver’s or cable
box’s
IN
jack.
2. Connect another RF cable 2 from the output
OUT
of the satellite receiver or cable box to the
TV’s
CABLE/ANTENNA 75 Ω
x jack.
3. Connect the Video, Audio left and right AV cables 3 to the
VIDEO
,
L
and
R
audio input jacks of
AV1.
4. Select the equipment you have connected in the Setup menu, Select your source, p. 22 and link
it to the
AV
connector you have connected your equipment to.
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your satellite receiver or cable box has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the
S-VIDEO
input of
AV1
and connect
the audio cables to the
AUDIO L
and
R
input jacks of
AV1.
When using the
S-VIDEO
connector do not connect any device to the
AV1 VIDEO
jack;
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.