Brother HL 2700CN - Manual (Page 127)

5 - 22 ROUTINE MAINTENANCE
Cleaning the outside of the printer
Clean the outside of the printer as follows:
1
Turn off the printer power switch and unplug the printer.
2
Take the paper tray out of the printer.
3
Wipe the outside of the printer with a soft cloth to remove dust. Dip the cloth in water and wring it
out thoroughly for cleaning.
Figure 5-31
4
Clean the paper guides of the paper tray with a dry soft cloth. Remove anything that is stuck inside
the paper tray.
Figure 5-32
5
Put the paper tray back in the printer.
6
Plug the printer into the AC power outlet/socket, and then turn the printer power switch back on.