Brother HL 2700CN - Manual (Page 25)

1 - 7 ABOUT THIS PRINTER
Panel lock setting
If the panel button settings have been changed, the printer may not work as you expect. If you are an
administrator of this printer, you can lock your settings to prevent changes from being made. See SETUP
on page 3-12.
Power Save Mode
This printer has a power saving mode. Since laser printers consume power to keep the fixing assembly
at a high temperature, this feature can save electricity when the printer is on but not being used. The
factory setting of the power save mode is ON so that it complies with the new EPA Energy Star
specification.
Toner Save Mode
This printer has an economical toner save mode. By using this feature you can substantially reduce
operating costs and extend the life expectancy of the toner cartridges.
Reprint setting
The printer saves data that you want reprinted. You can reprint a document without sending the data
again from your PC. If you do not install a CompactFlash
® card, you can reprint from RAM. See Reprint
setting on page 3-26.
When there is not enough memory to print the last job, you can reprint the last print page.
Network
Ethernet 10/100BASE-TX enables you to use the printer in the following environments:
(TCP/IP, IPX/SPX, AppleTalk, DLC/LLC, NetBEUI)
Also, many useful utilities, such as BRAdmin Professional Utility, Driver Deployment Wizard and Web
BRAdmin software for the Network administrator, are included. For details of the utilities, see the
documentation included on the CD-ROM. See Software for Networks on page 2-18.