Brother HL 2700CN - Manual (Page 63)

3 - 6 CONTROL PANEL
Liquid crystal display (LCD)
The display shows the current printer status. When you use the control panel buttons, the display will
change.
If you take the printer off-line, the display changes to show the emulation you have chosen.
If there are any problems, the display shows the appropriate error message, maintenance message, or
call service message so you will know that you need to take action. For more information about these
messages, see Troubleshooting in Chapter 6.
LCD messages
The message on the LCD display shows the current printer status during normal operation as shown
below.
The marks indicate the status of the toner in the toner cartridges (K: Black, C: Cyan, M: Magenta, Y:
Yellow). When the mark blinks ( ), the indicated toner is nearly empty. When toner becomes empty,
the indicator disappears completely.
When an error has occurred, the type of error is displayed on the first line of the LCD message as shown
below.
The message on the second line shows information for clearing the error as shown below.
READY
K C M Y
COVER OPEN
Close the Top Cover