Brother HL 2700CN - Manual (Page 82)

CONTROL PANEL 3 - 25
NETWORK TCP/IP TCP/IP ENABLE=ON
IP ADDRESS=169.254.###.###
SUBNET MASK=255.255.0.0
GATEWAY=0.0.0.0
IP BOOT TRIES=3
IP METHOD=AUTO
APIPA=ON
NETWARE NETWARE ENABLE=ON
NET FRAME=AUTO
APPLETALK =ON
NETBEUI =ON
DLC/LLC =ON
NETBIOS/IP =ON
ENET =AUTO
INTERFACE SELECT =AUTO
AUTO IF TIME =5
INPUT BUFFER =LEVEL 3
PARALLEL HIGH SPEED=ON
BI-DIR=ON
USB2.0 HIGH SPEED=ON
Automatic Private IP Addressing (APIPA) protocol, automatically configure an IP address and
subnet mask. See the Network User's Guide, which is provided on the CD-ROM.
Table 1: List of factory settings (Continued)
MODE MENU Factory Setting