Barco ICON H250/400 R9010510 - Manual (Page 142)

11. SNMP services
3. In the “Security” tab, the default Community is called ‘public’ and is read-only.
You may want to give read-write permission to ‘public’ (not recommended) or create a ‘private’ community
with read-write permissions.
4. In the Control Server, enable the SNMP support, and optionally, enable read-write support.
5. The SNMP service should be restarted, to take the changed settings into account.
To uninstall the snmp agent: regsvr32 /u IQProSNMP.dll
11.2 SNMP integration
Commands
Following commands are provided stored in the MIB :
Command Type
PROJECTORTYPE READ
SERIALNUMBER READ
LAMPPRODUCTNUMBER READ
LAMPSERIALNUMBER READ
SERVERTYPE READ
SERVERVERSION READ
EMBEDDEDSOFTWAREVERSION READ
PROJECTORLANGUAGE READ
PROJECTORNAME READ
LOCATION READ
ORIENTATION READ
RESOLUTION READ
DESKTOPRESOLUTION READ
PROJECTORSTATE-cooldown READ
PROJECTORSTATE-textbox READ
PROJECTORSTATE-projector READ/WRITE
PAUSE READ/WRITE
FREEZE READ/WRITE
PROJECTORRUNTIME READ
LAMPWARNINGSTATUS READ
LAMPALERTSTATUS READ
LAMPMODE READ/WRITE
LAMPRUNTIME READ
LAMPSTATUS READ
LAMPWARNINGTIME READ/WRITE
I2CDIAGNOSTICS READ
136 R5976992 ICON H250/400 13/12/2006