Barco ICON H250/400 R9010510 - Manual (Page 55)

6. Setup
Networking settings
Image 6-35
• Port settings: it is advised to leave these settings in their default value.
• Mail to field : see mail configuration in the client software
• SNMP enable: allows to enable the SNMP control of the projector.
The Enable write option allows to enable the client to overwrite projector settings via
SNMP.
Unchecking this option means that projector settings will only be read.
Exchange settings
This tab allows to fill in the exchange parameters to allow scheduling of projector tasks.
These parameters should be configured by your local IT administrator
Image 6-36
Miscellaneous settings
This tab allows following settings :
R5976992 ICON H250/400 13/12/2006 49