Barco ICON H250/400 R9010510 - Manual (Page 50)

6. Setup
A menu is dropped down
Image 6-24
projector list: contains a projector and a projector group sub list
2. click on the + sign of the projector list
A dialog box is displayed
Image 6-25
3. Fill in the Name, the IP address (optional) and the Port number of TCP/IP connection
Note: default port number = 9999
4. Fill in the alias
Tip: “Alias” is a custom name whereas “Name” is the name by which the projector is identified on the (corporate) network
5. Click OK to confirm or Cancel
The projector is now added to the list of projectors
Depending on the installed network (use of DHCP server or not), the IP address may be needed to be entered
or not.
44 R5976992 ICON H250/400 13/12/2006